Contact Us

630 KVA 6.6 KV Epoxy Resin Cast Delta Star Dry Type Transformer

General introduction of   630 KVA 6.6 KV Epoxy Resin Cast Delta Star Dry Type Transformer

The 630 kVA epoxy resin cast delta star dry type transformer was delivered to South Africa in 2022. The rated power of the dry type step down transformer is 630 kVA, the primary voltage is 6.6 kV and secondary voltage is 0.55kV with delta star connection,

  • Introduction
  • Contact Now

Product Introduction

The 630 kVA epoxy resin cast delta star dry type transformer was delivered to South Africa in 2022.

 

The rated power of the dry type step down transformer is 630 kVA with AN/AF cooling, the primary voltage is 6.6 kV with ±2*2.5% tapping range (NLTC), the secondary voltage is 0.55kV, they formed a vector group of Dyn11.

 

Cast resin technology provides excellent insulation and environmental protection, this together with the foil winding technology inside the resin offers the ultimate dry type transformer in terms of dielectric performance and short circuit withstand ability and ensures long term reliability for both distribution and special applications. cast resin transformers can be supplied with either aluminum or copper windings together with possibility of class F or class H insulation system, they can be designed to in-door or out-door installation with different enclosures.

We ensure that each one of our delivered units has undergone rigorous full acceptance testing. We provide one-package service from consulting, quoting, manufacturing, installation, commissioning, training to after sale services, our products are now operating in more than 50 counties in the world. We aim to be your most reliable supplier as well as your best partner in business!

 

Advantages

Fire resistant /Self-extinguishing(F1)

Environmental class(E2) and climatic class (C2)

From IP00-IP56 enclosure with AN, AF, ANAF or AFWF cooling

Maintenance free

Environmental friendly ,90% of material recyclable

 

Temperature control system

Built-in PT100 probes in 3 phase windings to detect the real-time temperature of windings and cycle display them in the digital screen.

Open circuit alarm and fault self-check alarm display and signal output.

3 stages automatically actions while the temperature reached to the set value, 1st stage the cooling fans start automatically, 2nd stage high temperature alarm,3rd stage over temperature trip.

Fans manual/auto control switch, timing start/stop, history data output.

4-20mA current output

RS485 Modbus communication protocol

Environment temperature measurement

Core temperature measurement

 

Scope of Supply

Product: resin cast dry type transformer

Voltage level: up to 35KV

Rating level: up to 20MVA

The transformer can be designed according to customer’s requirements

 

Technical Data Sheet

630 KVA Dry Type Transformer specifications and data sheet

Delivered to

South Africa

Year

2022

Model

SCB10-630kVA-6.6/0.55kV

Type

Resin cast dry type transformer

Standard

IEC60076

Rated Power

630 kVA

Frequency

50 HZ

Phase

Three

Cooling Type

AN/AF

Primary Voltage

6.6 kV

Secondary Voltage

0.55 kV

Winding Material

Aluminum

Vector Group

Dyn11

Impedance

4.5~6%

Tap Changer

NLTC

Tapping Range

±2*2.5%

No Load Loss

1.3 KW

On Load Loss

5.96 KW

Accessories

Temperature controller, Cooling fans

Remarks

N/A

 


630kVA-6.6/0.55kV Transformer Manufacturing Process

Transformer Construction of the Core:

Transformer Manufacturing Process


Finished 630kVA-6.6/0.55kV Transformer

630 kVA epoxy resin cast delta star dry type transformer

 

630 kVA dry type transformer


6.6kv dry type transformer

The epoxy resin dry type transformer has the characteristics of good electrical performance, strong lightning impact resistance, strong short-circuit resistance, small size, and light weight. The temperature display controller can be installed to display and control the operating temperature of the transformer windings to ensure the normal service life of the transformer.

 


 

Transformer ready for ship

transformer shipping

 

Why Insulation resistance of dry type transformer decreased

1.Reason analysis. Pouring type dry transformer winding is mostly made of resin pouring, conductor material is sealed in it, so the decrease of insulation resistance is mostly caused by moisture condensation on the surface of winding, dust accumulation or part of insulation material being affected by moisture.

2.Processing method Clean winding surface, surface moisture condensation with dry cloth wipe, natural air can be restored. It can be dried by heater and ventilated by fan. The neutral line (zero row) of the three-phase connection of dry-type transformer can be disconnected. The megohm meter is used to determine which phase the problem is in, and then the problem is carefully searched and processed.

 

FAQ

1. How can you support us as a partner?

We will offer you the best price, best service and other supporting documents such as quotation, technical data sheet, drawing, reference list, manufacturing plan, quality control plan, testing plan, test report, etc.

2. What is the scope of your after-sale service?

Installation, commissioning, training, maintenance, etc.

3. Why choose VOUCHIVAN?

Experienced transformer supplier with professional engineering team.

Complete customer service from quoting to operating.

Quick response 24/7.


Send us your detail requirements, we have professional service team to answer you ASAP!

Thank you for your attention on Vouchivan ELECTRIC!

We offer Oil immersed transformers, Dry type transformers, Compact transformer substations, etc.